What Size Squeegee Blades Do I Need for My Autoscrubber?
There is no one size fits all approach to ordering the correct squeegee blades for your auto scrubber. We wish there was, but with so many different makes, models and versions of auto scrubbers in today’s market, it’s simply not possible.
For simplicity, this article will discuss what to look for on your Tennant T500 walk behind autoscrubber but please note, if you do not have this specific machine, some of this information may apply to you if you have a different machine.
Contrary to popular belief, you do not need a tape measure to understand what replacement squeegee blades you need.
You just need to be aware of some key "stamps" that can be found on your squeegee assembly and/or scrub deck.
How to Identify the Scrub Deck Size of Your Machine Using the Squeegee Assembly
You will notice the images circled in blue, which contain the number 800.
The 800 is 800MM and when we convert this to inches, we are left with 32 inches (800 X 4 = 3200 or 32”)
“Ok. So, what squeegee blades do I need?”
If you have this information, please email it to help@sweepscrub.com and reference your make/model/serial number and one of our dedicated support specialists can help you with your order.
If you like to find information on your own, please reference one of our parts manuals for more information, here is a screen shot of how you would identify the replacement blades for this Tennant T500 machine using the 32” (800MM) information we found above.
How to Identify the Scrub Deck Size of Your Machine Using the Scrub Deck
We know, this sounds simple, but sometimes this isn’t commonly known for many reasons not worth mentioning here.
Like the squeegee assembly pictured above, most Tennant autoscrubbers also contain a similar stamp on top of the scrub deck.
Using the same approach as above with the squeegee assembly, we know that this is a 32-inch autoscrubber.
If you have this information, please email it to help@sweepscrub.com and reference your make/model/serial number and one of our dedicated support specialists can help you with your order.
If you like to find information on your own, please reference one of our parts manuals for more information, here is a screen shot of how you would identify the replacement blades for this Tennant T500 machine using the 32” (800MM) information we found above.
If you need help in understanding the differences between Linatex, Urethane and Gum Rubber squeegee blades please reference our article here WHAT IS THE DIFFERENCE IN SQUEEGEE BLADE MATERIAL? LINATEX, GUM RUBBER, URETHANE ETC
Browse Nilfisk Advance Parts by Model