Get a Formal Quote
NSS Charger 2717 DB
The Charger 2717 walk behind burnisher delivers a superior shine by polishing the floor at a high speed with plenty of pad pressure. Use the Charger 2717 after scrubbing to restore the "wet-look" luster of your floor finish.
3-4 hrRun time
1700 RPMBrush speed
Warranty: 7 years parts, 2 years labor and travel (NSS warranty). Warranty details
Is this the right machine for you?
Best for:
- Large finished floors: retail, grocery, schools
- 27 in. path at 1700 RPM
- Long runs: traction drive, 3 to 4 hours run time (NSS figure)
Not a good fit for:
- Scrubbing or stripping: a burnisher only polishes a clean, finished floor
- Small, crowded rooms
Not sure? Call 877-449-0447 and we will help you compare.
Key Features
- Working Width: 27 in. / 69 cm
- Pad Speed: 1700 RPM
- Pad Pressure: 80 lbs (36 kg)
- Sound Level: 68 dB(A)
Key Benefits
- High performance. The Charger 2717 uses an optimal combination of speed and pressure to quickly restore the luster of floor finish. The powerful motor on the Charger 2717 burnisher is perfect for concrete polishing with Twister diamond pads.
- Clean operation. The Charger 2717 captures the floor finish powder created during polishing with the efficient Vac-Trac Dust Control System built into the pad motor shroud.
- The electric advantage & low cost of ownership. Unlike propane burnishers, the Charger 2717 walk behind floor polisher doesn't need frequent maintenance. Save thousands of dollars of operating costs by avoiding propane fuel costs, oil changes, and other costly repairs.
- Two models to fit any application: Charger 2717 AB - Pad assisted burnisher. The pad motor is angled to help pull the machine forward.
- Charger 2717 DB - Wheel-drive burnisher. A twist grip throttle controls a drive motor, reducing employee fatigue and improving productivity.
Which configuration should I pick?
-
AGM batteries: sealed and maintenance free (no watering).
-
Sulky: a ride-behind platform so the operator can stand while the machine moves.
Not sure? Call 877-449-0447 and tell us your floor type and square footage. We will help you pick.
Configurations
| Configuration |
Part number |
Manufacturer description |
| AGM 330Ah, on-board charger |
6402731 |
CHARGER 2717DB OBC 330AH AGM BATT |
| AGM 330Ah, charger, with sulky |
6402734 |
CHARGER 2717DB OBC 330AH AGM SULKY |
What comes in the box
- Charger 2717DB machine
- AGM batteries and on-board charger
- Sulky kit adds a ride-behind platform
Contents depend on the kit you choose. Ask us to confirm before you order.
Wear parts for this machine
Keep a spare set on hand so the machine does not stop when a brush, pad or filter wears out.
Need another part? See our NSS parts catalog (11,000+ parts), or send us your machine model and serial number and we will find the part.
Pads: TASKI Twister diamond floor pads clean and polish in one step. IntelliPad works for daily cleaning on most floors.
Specifications
- 27in
- 69cm
- 1700 RPM
- Runtime: 3-4 hr
- AGM
- On-Board Charger
Frequently asked questions
What does a burnisher do?
It spins a pad at high speed to polish floor finish to a high gloss. Scrub the floor first. Use pads rated for high speed.
What is a sulky?
A small platform behind the machine. The operator stands on it, so long runs are less tiring.
Which dust filter bag fits?
The Charger 2717 filter bag. See the parts lists on this page.
How does it ship?
Machines this size ship by freight on a pallet. Tell us if you need a liftgate or inside delivery when you order. Call 877-449-0447 for a freight quote to your zip code.
Downloads
Buying for a school, hospital, agency or facility?
We provide formal quotes and can help with purchase orders, tax-exempt orders and vendor setup. Email sales@sweepscrub.com or call 877-449-0447 (Mon to Fri, 8am to 5pm CT). How to order with a quote or PO
Genuine NSS equipment from an authorized dealer.
