Generic

Hex Tip Retainer. Tip Retainer 18 mm thread, fits vent grip lance.

Tip-Jet Retainer Caps, fits all Tip-Jet nozzle bodies, holds spray tips and metering orifices firmly in place.

May be used on high or low side of pump. Adjustable flow orifices plus adjustable chemical valves. Standard features similar to ST-62. Performance ...

1/4" MPT x 1/4" Barb Brass Body Buna or Viton Check Ball

Inexpensive way to create suction on inlet side of pump 3/8" MPT x 5/8" Barb Used in-line from float tank to pump One-Piece, Machined-Brass Standar...

Swivels easily at low pressure to eliminate twists and tangles in chemical or water lines. Brass MPT base with steel hose barb

WARNING: LOW-PRESSURE USE ONLY! Not for Use on Pressure Washer Discharge Hose Stainless-Steel Band and Housing Screw Clamp - Gear Tensions

Elapsed time No battery required 50/60 Hz Digital quartz accuracy (+ .02%) Extremely rugged and tamperproof Sealed from dirt and moisture Requires ...

24-240V AC

Protect your turbo nozzle from damage caused by debris in the water flow.

Swivels freely even at maximum pressure level noted below. Brass and Stainless-steel Materials.

Upgrade confidently with our Hex-Head Locknut Fittings, ensuring reliability and ease of use.

15 Amp Microswitch Panel Mountable Use for time-delay shutdown or as burner control Can be used as Normally Open (NO) or Normally Closed (NC)

Provides three cleaning options: low-pressure for soap or chemical application; a 15° angle for high-pressure cleaning; and a rotating nozzle for m...

Up to 6000 PSI Working Pressure (18,000 PSI Burst) Attractive Zinc-Plated Protective Coating U.S. Standard Taper Pipe Threads

Durable nipple fitting for pressure washers. Use the option buttons below to select the correct fit for your application.

Elevate your pressure washer system with High PSI Zinc Pipe Nipples, featuring Male Pipe Threads (MPT) for a secure connection and durability in de...

Upgrade the strength and reliability of your pressure washer system with these Brass JIC Nipples. Engineered for durability, these high-quality nip...

Up to 10 GPM flow for low side pressure, 250 PSI. Heavy Nickel-Plate Chemical-Resistant Stainless-Steel Ball Machined-Brass Body New Ball Guide and...

Protect Nozzles and Finished Surfaces Deep Nozzle Recess Tough Plastic Protector 1/4" FPT Coupler Inlet

Tip-Jet Nozzle Bodies, All outlet connections are 11/16" - 16 male thread to fit Tip-Jet tip retainers and adapters.

Nylon "Speedi-Clamp" Tightens with a Snap Releases with a Twist Pack of 50

O-Rings for Legacy, AP, Hansen, Foster, Parker and quick-coupler brands.

Elevate the performance of your pressure washer system with our Brass Open Nipple. Engineered for durability, this high-quality component guarantee...